TCK56Y CNC Turning Milling Center with Y/C Axis One-Clamp Complete Machining
TCK56Y CNC turning milling center
,Slant bed CNC lathe machine with Y/C axis
,One-clamp complete machining CNC lathe
TCK56Y is a 45° slant-bed Y-axis turn-mill composite CNC lathe with X/Y/Z/C 4-axis simultaneous control, built on rigid HT300 cast iron one-piece bed. It is equipped with a 12-station power turret, hydraulic chuck, optional servo programmable tailstock, and optional FANUC/GSK CNC system. Y-axis travel: ±30 mm (some versions ±50 mm); C-axis supports arbitrary indexing. It combines turning, milling, drilling, boring, tapping, slotting, flat milling and polygonal machining, to finish part features on OD, ID, end face and side face in one single clamping.
| Specification | Unit | TCK56Y-1000 |
|---|---|---|
| Max.swing over bed | mm | 630mm |
| Max cutting diameter | mm | 450mm |
| Maximum cutting length | mm |
1000mm with power tower 1100mm with servo tower |
| X/Z axis max. travel | mm | 280/1200(Effective processing length 1000) |
| X/Z rapid traverse | m/min | 20/20 |
| Hand wheel | - | 0.001/0.01/0.1 |
| X, Z feed rate | mm/min | 0~5000 |
| X and Z manual feed speed | mm/min | 0~1260 |
| X/Z axis servo motor torque | N.m | 15/15 |
| X/Z axis position accuracy | mm | 0.008/0.008 |
| X/Z axis reposition accuracy | mm | 0.005/0.006 |
| Y axis travel | mm | ±50 |
| Y axis motor | N.m | 10 |
| Max.spindle speed | r/min | 10-3000 |
| Max. spindle torque | N.m | 100 |
| Spindle nose | - | A2-6 |
| Spindle bore | mm | 66 |
| Max. Bar capacity | mm | 52 |
| Spindle shift mode | - | stepless |
| Chuck | - | 8’’ hollow hydraulic |
| Tool post type | - | 12 station hydraulic turret LQD100 BMT55 |
| Tool post size | mm | 25*25m |
| Spindle motor power | kw | 11 |
| Tailstock travel | mm | 900 |
| Tailstock taper | - | MT5 |
| Guide form | - | 30° degree |
| Weight | kg | 4200 |
| Machine dimensions | mm | 3050*2100*2350 |
-
High machining accuracy
Single-setup production eliminates re-clamping errors; better concentricity, position tolerance and consistent batch quality.
-
Strong rigidity & stable cutting
45° integral slant cast bed, good vibration resistance, suitable for both heavy turning and precision milling; chip removal is smooth with no chip accumulation.
-
High efficiency & shorter cycle time
Reduces repeated fixturing, manual handling and machine-to-machine transfer; one machine replaces ordinary CNC lathe + milling machine.
